|
|
NVH parameters determination of gearbox housing
Belák, Kristián ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
This master’s thesis deals with determination of NVH parameters of the gearbox housing. Introductory part is focused on the necessary theoretical knowledge. Subsequently, it contains the modal analysis with the computational and experimental approach, which are being compared to each other. In the case of the computational approach, analysis of the influence of bolt pretension on the modal properties is also involved. The thesis continues with the harmonic analysis with the computational and experimental approach, including their mutual comparison. Based on these analyses, design modifications for improvement of the NVH parameters are designed at the end of the thesis, which are being compared to each other and to the original geometry, using the computational approach.
|
|
|
3D print of gearbox housing model
Kopecký, Marek ; Rebenda, David (referee) ; Dočkal, Kryštof (advisor)
This bachelor thesis focuses on the design of two stage spur gearbox housing for food processor. Strength calculation was conducted using FEM analysis. State of the art from the field of transmission casing, CAD model and prototype created by 3D print are parts of the thesis. 3D printed model is meant for demonstration of bearing seats and use of normalized mechanical elements. The thesis should provide fundamentals of gearbox housing and show a solution of one case.
|
|
|
Optimisation of electric vehicles gearbox housing with focus on emitted noise
Fürich, Adam ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
This thesis deals with the vibration and noise of the gearbox for an electric vehicle. The gearbox itself acts as an emitter of unwanted noise caused by vibration excitation of the internal components of the gearbox. It is therefore necessary to deal with a complex unit such as the gearbox at system level as soon as it is being designed. This can be achieved using analytical tools and software. In this thesis, in order to evaluate the validity of the designed gearbox, a procedure is developed using both technical experiment and numerical simulations. The effect of the bolt preload is not overlooked for the following computational modelling dealing with the radiated noise of the gearbox. The results obtained from the performed technical experiments were then evaluated and compared with the results of the computational models. In this way, it is possible to compare the different approaches, their limitations and weaknesses. Furthermore, the thesis deals with design modifications that are analyzed using computational modeling. The thesis is concluded with a brief description of the application of each approach and an evaluation of the gearbox design modifications.
|
|
| |
|
|
NVH of gearbox housing for electric vehicles
David, Jan ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
This master’s thesis deals with determination of NVH parameters of the gearbox housing for electric vehicle. The introduction part is focused on the theoretical knowledge of this issue. Subsequently, the deviations of geometry on the gearbox were measure by 3D scan method. The next part of thesis is focused on the modal analysis, which is solved by numerical approach and followed by experimental verification. During the numerical calculation solving, the influence of the screw preloading on the modal properties of the structure, was also taken into account. Numerical harmonic analysis was then performed and the results were compared with the experimental approach. The conclusion is devoted to material damping and comparison of the individual results.
|
|
|
Optimisation of electric vehicles gearbox housing with focus on emitted noise
Fürich, Adam ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
This thesis deals with the vibration and noise of the gearbox for an electric vehicle. The gearbox itself acts as an emitter of unwanted noise caused by vibration excitation of the internal components of the gearbox. It is therefore necessary to deal with a complex unit such as the gearbox at system level as soon as it is being designed. This can be achieved using analytical tools and software. In this thesis, in order to evaluate the validity of the designed gearbox, a procedure is developed using both technical experiment and numerical simulations. The effect of the bolt preload is not overlooked for the following computational modelling dealing with the radiated noise of the gearbox. The results obtained from the performed technical experiments were then evaluated and compared with the results of the computational models. In this way, it is possible to compare the different approaches, their limitations and weaknesses. Furthermore, the thesis deals with design modifications that are analyzed using computational modeling. The thesis is concluded with a brief description of the application of each approach and an evaluation of the gearbox design modifications.
|
|
|
NVH of gearbox housing for electric vehicles
David, Jan ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
This master’s thesis deals with determination of NVH parameters of the gearbox housing for electric vehicle. The introduction part is focused on the theoretical knowledge of this issue. Subsequently, the deviations of geometry on the gearbox were measure by 3D scan method. The next part of thesis is focused on the modal analysis, which is solved by numerical approach and followed by experimental verification. During the numerical calculation solving, the influence of the screw preloading on the modal properties of the structure, was also taken into account. Numerical harmonic analysis was then performed and the results were compared with the experimental approach. The conclusion is devoted to material damping and comparison of the individual results.
|
|
|
3D print of gearbox housing model
Kopecký, Marek ; Rebenda, David (referee) ; Dočkal, Kryštof (advisor)
This bachelor thesis focuses on the design of two stage spur gearbox housing for food processor. Strength calculation was conducted using FEM analysis. State of the art from the field of transmission casing, CAD model and prototype created by 3D print are parts of the thesis. 3D printed model is meant for demonstration of bearing seats and use of normalized mechanical elements. The thesis should provide fundamentals of gearbox housing and show a solution of one case.
|
|
|
NVH parameters determination of gearbox housing
Belák, Kristián ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
This master’s thesis deals with determination of NVH parameters of the gearbox housing. Introductory part is focused on the necessary theoretical knowledge. Subsequently, it contains the modal analysis with the computational and experimental approach, which are being compared to each other. In the case of the computational approach, analysis of the influence of bolt pretension on the modal properties is also involved. The thesis continues with the harmonic analysis with the computational and experimental approach, including their mutual comparison. Based on these analyses, design modifications for improvement of the NVH parameters are designed at the end of the thesis, which are being compared to each other and to the original geometry, using the computational approach.
|
|
| |
guest ::
